2017–2026 Ford F-250 F-350 F-450 Super Duty Forged Carbon Fiber Drop Windshield Visor

2017–2026 Ford F-250 F-350 F-450 Super Duty Forged Carbon Fiber Drop Windshield Visor
Item# BMC-STRUCK17SDCF-2
$1,800.00$1,699.99
Shipping Insurance: 
Availability: Usually ships in 2-3 weeks
Quantity:

2017–2026 FORD SUPER DUTY FORGED CARBON FIBER DROP WINDSHIELD VISOR

Give your Ford Super Duty a distinctive custom look with a forged carbon fiber drop windshield visor. Designed for 2017–2026 Ford F-250, F-350 and F-450 trucks, this approximately 10-inch-tall visor extends about 7–8 inches down the windshield and features a glossy forged carbon fiber appearance.

IMPORTANT — PROFESSIONAL INSTALLATION RECOMMENDED
This is a custom aftermarket component. Installation involves test fitting, A-pillar drilling and urethane adhesive bonding. Professional installation is recommended.

FITMENT

  • 2017–2026 Ford F-250 Super Duty
  • 2017–2026 Ford F-350 Super Duty
  • 2017–2026 Ford F-450 Super Duty

Not listed for F-550. Confirm your truck’s year and model before ordering.

PRODUCT FEATURES

  • Forged carbon fiber construction and finish
  • Approximately 10 inches tall
  • Extends approximately 7–8 inches down the windshield
  • Distinctive custom appearance
  • Designed for 2017–2026 Ford Super Duty F-250, F-350 and F-450
  • Includes mounting hardware, Betaseal urethane adhesive and installation instructions

WHAT’S INCLUDED

IMPORTANT — CARBON FIBER INSTALLATION

Careful test fitting and proper surface preparation help achieve secure bonding and a clean finished appearance. Carbon fiber versions can be more rigid than fiberglass. Gently warming the visor before installation may allow the resin to soften slightly and provide additional flexibility for fitment. Follow the installation guide and use care when applying heat; do not overheat the part.

Test fit the visor and confirm positioning, A-pillar alignment, windshield clearance and wiper clearance before drilling or applying adhesive. Installation requires drilling into the A-pillars and bonding the windshield-contact points with urethane adhesive. Professional installation is recommended.

Sensor notice: Due to the visor’s position, sensors located in front of the rearview mirror may be blocked or deactivated after installation. Removing the visor may be required to restore their operation. Check your vehicle’s equipment and installation requirements before ordering.

FREQUENTLY ASKED QUESTIONS

What trucks does this visor fit?
It is listed for 2017–2026 Ford F-250, F-350 and F-450 Super Duty trucks. Please confirm your model year and truck before ordering.

Does installation require drilling?
Yes. Installation requires drilling mounting holes into the A-pillars for the supplied self-tapping screws.

Is professional installation recommended?
Yes. Test fitting, drilling and urethane adhesive bonding are involved. Professional installation is recommended.

Does the visor affect sensors?
It may block or deactivate sensors located in front of the rearview mirror. Removing the visor may be required to restore sensor operation.

Will the visor need to be warmed before installation?
Gently warming the visor may provide slightly more flexibility by softening the resin. Follow the installation guide and avoid overheating.

BEFORE YOU ORDER — PLEASE READ

This is a custom aftermarket forged carbon fiber component. Installation involves test fitting, A-pillar drilling and adhesive bonding. Professional installation is recommended. Review the installation instructions and confirm vehicle fitment and sensor considerations before ordering.

Questions about fitment or installation? Contact BMC Extreme Customs before purchasing.

Accessories