Transform your 2010 2011 2012 2013 Chevrolet Camaro LT/LS & SS with this great-looking twelve (12) piece Rally Stripe Graphics kit.
The pieces in this kit are precut and ready to install in a wide variety of colors - NO TRIMMING required!
Arguably the most correct version of the famous "Bumblebee" style available, this stripe package is not just a set of straight strips in a box. Our graphic kit consists of prefitted and contoured pieces with a classic 0.25" (6.35mm) pinstripe border as shown in the illustration.
Graphics are specifically made for the 2010-Current Chevrolet Camaro with factory Hood and Spoiler as shown and will not fit any other vehicle. Kit includes two (2) factory Rear Spoiler options.
Stripe package is manufactured for a center spacing of 7" (17.78cm) at time of installation.
OPTIONS: Trimmable Spoiler Kit consists of two (2) pieces 16" (40.64cm) in length that can be trimmed during installation for custom spoiler applications.
Note: Due to overall width of the kit when installed, optional Roof pieces are not available.Click here for easy-to-follow general online instructions!Click here to get color samples!
NOTE: Graphics are made to order to ensure freshness of vinyl for easier installation. Please allow 4-7 business days for production. Kits are typically shipped with USPS Priority Mail.
*INSTALLATION: Add an application squeegee and application fluid for easier installation at home. WRAP FILM*: We recommend to NOT use application fluid, but rather prep solution, when working with Wrap Film. Most of our vinyl is High Performance Premium Cast Vinyl and can be installed wet while Wrap Film should only be installed dry (no application fluid).
RETURN POLICY FOR GRAPHICS: 30 Days Return Policy. Please note that due to the large number of color options and configurations, graphics are considered custom work and any graphics returned will have a 35% restock fee. Graphics kits with custom wording/text cannot be returned or refunded after it has been cut.
MORE NOTES: We use high-performance premium cast vinyl unless otherwise noted. We cut our vinyl to be approximately 1/16"-1/8" from edge in order to prevent peeling/pull back and allows for easier installation by not requiring installer to remove car parts. Although our vinyl may resemble the OEM designs, it may not be consistent with the OEM lengths. Many OEM vinyl kits are made so that they go around edges and require removal of your vehicle parts such as grilles and bumpers. Kits do NOT come pre-spaced in packaging as to ensure customers remove and align each piece individually for correct placement and installation.