Add style and function to your 2008-2022 Dodge Challenger with the RKSport Challenger T/A Ram Air Hood, PN 47011000. This Challenger Hood is like no other and will allow your car to stand out from the crowd. The hood has a functional Ram Air T/A scoop that can omit cool air into your intake box.
-Made in the USA
-Fully Functional Ram Air Hood
-T/A Style Ram Air Scoop
-Show Quality Finished
-Hand Laid Fiberglass
-Smooth Gel Coat Finished Both on Top and Bottom Sides
-Reinforced Metal Latch & Hinge Plate For Additional Safety
-Direct Bolt-on Using OEM Hardware
Note: For safety purposes, hood pins are required for ALL aftermarket hoods. Upon receiving the hood please be sure to inspect the item for "freight damage". If there are signs of freight damage you must refuse the item then contact us immediately. The two most common signs of freight damage are holes punctured by a forklift or it's being dropped by the driver causing the corner to break off. Once we verify the freight damage with the carrier a replacement item will be shipped immediately. This process usually takes about 5-10 business days. It is the customer's responsibility to inspect the item. BMC Extreme Customs will not be held liable for any damages after the delivery receipt is signed off.Questions and answers?
DO THE HOODS SHIP 'PAINT READY'? Yes, your Mopar hood will arrive sealed in premium quality, gray, gel coat. We recommend light sanding prior to applying primer and paint.
HOW DIFFICULT ARE THE HOODS TO INSTALL? RKSport makes it easy! Disconnect the struts, wiper nozzle tubing, and engine compartment lamp. Unbolt the hood from the hinges and remove the hood from the vehicle. Remove all stock hardware from the stock hood and re-install onto the RKSport Hood. The Challenger has multiple adjustment points to assure a perfect fit. We strongly recommend pre-fitting your new hood prior to painting. This will greatly reduce the chance of marring the hood once it is painted.
WILL WATER GET INTO THE ENGINE THROUGH THE RAM AIR SCOOP? RKSport has developed an effective water management system for all our Ram Air hoods to prevent any water that enters the scoop from making it to the intake. The water is ultimately directed weep holes that allow the water to exit the hood away from the intake and engine.
CAN I RE-INSTALL THE STOCK HOOD LINER ON THE NEW HOOD? It is possible but you would need to modify it to make it work. RKSport Hoods do not require a hood liner. The primary purpose of a hood liner is to protect the paint from engine heat. The double-walled construction of our hoods, combined with the natural ability of fiberglass to dissipate heat offer more than adequate protection.Availability:
Made to Order: Usually ships in 1-2 WeeksSHIPPING TO 48 CONTIGUOUS STATES:
This item has a FREE SHIPPING with $95 HANDLING FEE promotion to most addresses in the 48 contiguous states. However if shipping to a remote location (e.g. farms, military base, etc.) there may be additional shipping charges. Contact us for shipping outside 48 contiguous states.SHIPPING TO CANADA:
Shipping to most Canada address is US$400.00 and covers shipping charges, brokerage fees, tariffs, and taxes. US$400.00 is a DELIVERED price.